The key element to keep your lawn mower in good working condition is to keep it neat and clean, not only from the outside but also from all other internal components. The most important part to look for is the lawn mower carburetor.
As long as the carburetor is maintained correctly, your lawn mower will keep working at a good pace. If your mower is not working perfectly, you should always check the condition of the carburetor.
Regardless of how much you use the lawn mower, you should frequently be checking the condition of the carburetor so that the functioning of the mower does not get affected in any way.
As not everyone is an expert in cleaning mower carburetors and you want to do the task yourself for satisfaction, you no longer need to search for the ways to clean it as this article is all about how to clean a lawn mower carburetor and how you can do it yourself in an efficient manner.
How to Know If Carburetor Needs Cleaning?
It is recommended to check your lawn mower carburetor and other components frequently to keep it functioning perfectly. However, the lawn mower shows some signs which indicate that there is some problem with your components, and you need to check it.
For example, if the mower is not starting properly, and when it starts, it stops in between, or when the mower exhales black fumes and consumes more fuel than usual, all these points toward the carburetor condition.
Procedure for Cleaning the Lawn Mower Carburetor
The process is not complicated at all; however, if this is your first time cleaning the carburetor, you should think of a way to remember the steps as you need to reassemble the parts in the end.
The best way of doing this is to take photos with your mobile phones, and you will know exactly which part is needed at which place.
No matter what type of work you are going to perform, always remembers to follow the safety guidelines.
In this case, you should be working in an open area, and you have a fire extinguisher near to you for use if needed. You can also check the safety protocols on the manual.
Once you are ready to perform the operation, follow the steps below accordingly.
Steps to Follow
Disconnect the Power Source
The first thing you need to make sure of is that the mower power source is disconnected and the engine is cool.
Before moving to the carburetor, you need to check the air filters; the air filters need to be cleaned so that airflow is not disrupted. Blockage in airflow also results in failing to start the mower.
Detach the Removable Parts
Remove the cover if you are facing any difficulty in working, also make sure that you have shut down the fuel source.
Meanwhile, you can also check the fuel line for obstruction. In addition to the air filters, also check other connections that are linked with the carburetor.
All connections need to be neat and clean for enhanced efficiency and performance of the mower.
It is preferred to separate the carburetor so that it can be cleaned properly, remove all the removable accessories and components attached to it. You may need to use screws and divers to detach the carburetor fully.
Cleaning the Carburetor
Using a large container, pour some water with appropriate dilute carburetor cleaner in the right proportion, and then leave the components in a container for some minutes.
After a few minutes, use a brush to clean and polish the soaked components. You can use different carburetor cleaners or sprays according to your choice.
Clean the small parts as they are often ignored and thus affect the overall functioning of the mower. Properly clean all the parts, remove dirt, debris, and deposits. Use sandpaper to remove rust if found on the components.
Recheck all the components and parts to see if there is anything remaining that needs to be cleaned; once you are satisfied with it, keep the parts and carburetor in an open place and let it dry completely.
Check this, Best Riding Lawn Mower for 1 Acre
Reassembling the Components
If you have reached here, it means that you have successfully cleaned the carburetor, and all you need now is to reassemble and join it.
When cleaning the components, it is recommended that you check and replace the parts which are damaged or cannot be repaired. For better results, when replacing, always use the applicable parts with your specific model.
When you reassemble the parts, it is necessary that you join them in a correct way; otherwise, it can cause damage to the mower, do check that you have adequately placed all the parts before you place a cover.
You also need to link the fuel line and attach the air filters you have removed in the first place.
As soon as all the components are reassembled, you need to start the mower for testing. If it starts in a go and does not go off unless you do it, it means that the carburetor has been fixed by the book.
On the other hand, if you find any problem in the functioning of the mower after cleaning the carburetor, it means that the problem was not in the carburetor, and you need to inspect other elements.
For example, you should check that the lawn mower has the required amount of fuel, switch, and the plug are in good condition or not.
A small fault can disrupt the whole mechanism; for that reason, you should inspect the elements thoroughly.